SATILDI

Coord3 EOS 5.4.4

Ultra-rigid platform in advanced alloy
Rapid thermal diffusion through the frame when the temperature changes
The FEA design guarantees a moment of inertia and optimal rigidity , allowing strong acceleration
Base made of a single piece of granite with M8 threaded inserts in a large chessboard pattern
Rigid air bearings
Z-axis pneumatic counterbalance
Measuring scales with a resolution of 0.1 microns with dynamic signal processing
Fully digital motion control with fusion of the probe path for optimal CMM performance
Friction reducers with hysteresis close to zero on all axes
Passive vibration damping system that isolates from external vibrations
Free access to the CMM measurement area
Maximum positioning speed : 500 mm / sec
Maximum acceleration : 1500 mm / sec²
Nominal temperature : 20°C
Permissible temperature range : 18 – 22°C (extended range 16 – 26°C)
Temperature gradient : 0.5°C / hour – 2°C / day (extended interval 5°C / day)
Operating temperature range : 15 – 35°C
Relative humidity : 40 – 80% (without condensation)
Acceptable vibrations: 30 mm / sec² 1-10 Hz | 15mm / sec² 10-20 Hz | 50 mm / sec² 20-100 Hz
Minimum pressure : 5 Bar (72PSI)
Compressed air consumption : 100Nl / min (3 cfm)
Power supply : 230v 50Hz or 110v 60Hz (+/- 2% single-phase)
Maximum absorption : 10 to 1200 W (1600 W on the larger models)

Açıklama

Satışını yaptığımız tüm ürünlerimiz için aşağıdaki işlemler tarafımızdan yapılabilir.